Para usar esta imagem numa página da Wikipédia inserir: [[Imagem:Visard mask front.jpg|thumb|180px|Legenda]]
Descrição do ficheiro
DescriçãoVisard mask front.jpg
English: This is a large Visard mask (also spelled 'vizard'), worn by gentlewomen in the 16th and possibly into the early 17th centuries.
The mask was found during the renovation of an inner wall of a 16th-century stone building. The wall was approximately four feet thick, and the mask was found concealed within the inner hard core of the wall, which consisted of soil, straw and horse hair (for insulation). The mask was folded in half, lengthways, and placed within a small rectangular niche behind the face of the wall. Due to the conditions when found, the mask has an amount of soil and straw adhering to one half. The opposite half still has the velvet material in relatively good condition, but is in need of some conservation to prevent further damage.
The mask is oval and measures 195mm in length and 170mm in width. The eyes are lentoid, 30mm wide and 15mm high. The mouth is 48mm wide, widening in the centre to make a gap for the nose. The nose area is strengthened to stand out and form a case around the wearer's nose. The mask weighs 32.4g (although this weight is inaccurate, due to the amount of soil and straw adhering to one side).
The outer fabric is black velvet. The lining is silk. The inside is strengthened by a pressed-paper inner. The three layers are stitched together by a black cotton thread.
On the lining, just below the centre of the mouth, is a loose thread of white cotton. This cotton would have held the black glass bead (found in association with the mask). The bead is 10mm in diameter and weighs 1.42g. There is some wear at the hole, which is 3mm in diameter. The black glass bead was used to hold the mask in place. With a lack of holes to allow string or elastic to be put around the head, the mask would have instead been held in place by the wearer holding the black bead in her mouth.
partilhar – copiar, distribuir e transmitir a obra
recombinar – criar obras derivadas
De acordo com as seguintes condições:
atribuição – Tem de fazer a devida atribuição da autoria, fornecer uma hiperligação para a licença e indicar se foram feitas alterações. Pode fazê-lo de qualquer forma razoável, mas não de forma a sugerir que o licenciador o apoia ou subscreve o seu uso da obra.
partilha nos termos da mesma licença – Se remisturar, transformar ou ampliar o conteúdo, tem de distribuir as suas contribuições com a mesma licença ou uma licença compatível com a original.